Welcome to Phamracy Retail Software Download (Candela- Full Featured Trial Version)
LumenSoft Candela pharmacy retail management system resources are available for download. This trial version has all features of LumenSoft Candela for pharmacy (Personal Edition). The Same trial version can be upgraded to full version by obtaining license from LumenSoft Technologies. This trial version comes with sample pharmacy database. This gives an instant start and enables the user to view the reports and perform key functions like purchase and sales without the need to configure the system. User is free to change the user preference and make new entries to further explore the system.
Pharmacy Retail Software Download- Hardware and Operating System Requirements
Windows Server 2003,2008,2008 R2,2012,2012 R2,2016
Hardware Requirements: Minimum requirements include a PC with Pentium IV 2.0 GHz (Pentium IV 3.0 or faster processor is recommended), 2 GB RAM (or more), as well as a standard keyboard, mouse, monitor, and CD-ROM drive.
Pharmacy Retail Software Download Instructions
1). Click the download Candela Trial Setup 12060 button based on your system specifications.
2). System will start downloading. Once the download is complete, double click on the RAR file to extract it in a folder.
3). Double click on Candela 184.108.40.206 32 bit (Pharmacy)/Candela 220.127.116.11 64 bit (Pharmacy) file to run and install.
Note: Windows 10 users need to go through “For Windows 10 Users Only document” available in extracted folder before starting installation.
If you face any problem during installation of trial version, you can contact LumenSoft through email at: [email protected]
Candela Hardware Compatibility and Configuration FAQs
Which Barcode printers are supported by Candela?
Candela provides Barcode printing on two different types of printers. One is the standard laser printer which uses pre-designed sticker sheets. Other option is to use Barcode printers. For this option Candela provides integration with two different printer types: TSC Barcode Printers and Zebra Barcode Printers.
1. TSC TTP 244 Plus
2. Zebra TLP 2844
3. Zebra ZM 400 / ZM 600
Note: All models of Zebra Printers which use ZPL or EPL are expected to be supported by Candela but above listed models are tested and their working is verified.
For all these printers Barcodes can be designed in Candela using the Barcode Designer. The barcode designer is available in Menu: Utilities > Setup & Configuration > Customize Barcode Printing
Which Customer Display (Pole Display) are supported by Candela?
Candela supports the following Customer Displays:
1. VFD 450
2. VFD 460
3. VFD 650
4. VFD 850
These devices come with Serial interface (RS232 – DB9) and also with USB interface. If You buy a device with USB interface then it should come with a Driver for your operating system. This driver will install “Virtual COM Port” on your computer. While making an invoice the Pole Display shows the items which are scanned and running total of the invoice. For this device to work you have to do some configuration in Candela through Menu: Utilities > Setup & Configuration > Shop Configuration. On this screen there is section “Customer Display Unit Configuration”. Here “Check” the “Enable Customer Display Unit” check box and then select the serial port on which this Customer Display is connected (e.g. COM20). Remember, this COM port is not physical but this is virtual, created by the driver software
I want to connect Cash Drawers with Candela. Which Cash Drawer Should I Buy?
Cash Drawers which work with POS systems come with following three different interfaces:
1. Cash Drawers with RJ11 interface – These type of cash drawers are suitable if you have a receipt printer which has RJII jack (also labeled as DK). Generally the retail printers (usually 3.5″ wide paper) has this option available. You just need to plug the wire coming from Cash Drawer into the printer. Now whenever you send a invoice for printout to the printer, the cash drawer automatically opens up. If you have this type of printer then you should buy Cash Drawer with RJ11 jack.
2. Cash Drawers with Serial Port (DB9) – These Cash Drawers provide a serial cable (RS232 – DB9) which should be connected to the serial port of your POS Computer. Before You buy this type of Cash Drawer Please make sure that your computer has 9-pin serial port available. Candela supports these Cash Drawers. Whenever you send a invoice for printout to the printer, the cash drawer automatically opens up. For this device to work you have to do some configuration in Candela through Menu: Utilities > Setup & Configuration > Shop Configuration. On this screen there is section “Cash Drawer Configuration”. Here “Check” the “Enable Cash Drawer” check box and then select the serial port on which this Cash Drawer is connected (e.g. COM1)
3. Cash Drawers with USB Port – These Cash Drawers has a USB cable which should be connected to the one of the USB ports of your POS Computer. Before You buy this type of Cash Drawer Please make sure that this Cash Drawer comes with the Driver for your installed operating system (Window XP, Window 7 etc.). These Drivers install “Virtual COM Ports” on your computers. Candela supports these Cash Drawers. Whenever you send a invoice for printout to the printer, the cash drawer automatically opens up. For this device to work you have to do some configuration in Candela through Menu: Utilities > Setup & Configuration > Shop Configuration. On this screen there is section “Cash Drawer Configuration”. Here “Check” the “Enable Cash Drawer” check box and then select the serial port on which this Cash Drawer is connected (e.g. COM23). Remember, these COM ports are not physical but these are virtual created by the driver software.
What Types of Printers are supported by Candela for making Invoices?
Candela supports the following Receipt Printers:
1. TYSSO PRP 085 / 088
2. CITIZEN : CT-S601
3. GSAN : GS-8030T
4. ARURA MODEL ARP-900KC 2.
5. EPSON TMU220
6. SAMSUNG BIXOLON SRP350
The above mentioned receipt printers are examples of some of the printers which are tested and known to work with Candela. In general, any printer which gets installed on Your operating system should work with Candela.
Which Data Collector is supported by Candela?
Candela supports the following Data Collectors:
1. Cipher Lab 8000 C, 8300
2. TYSSO BCP 7000, 8000
3. Metrologic MK 5502
4. Metrologic Scan Pal 2
The above mentioned data collectors are tested and known to work with Candela. Other data collectors may work with Candela but You should first confirm from Technical Support person before buying any device.